The Toradex Libraries are intended to support all major interfaces and Toradex OS extensions for your Windows CE environment.
The libraries are currently available for Colibri T20, T30, VFxx, iMX6, iMX7, as well as for Apalis T30 and iMX6 modules.
The ZIP file contains
Important Note: Windows normally blocks the content of .chm help files. When you open the file, you will only be able to see the navigation tree, but no content!
To enable the contents:
- Store the .chm file on a local folder (not a network drive)
- In the file explorer, right-click onto the file, and open the Properties dialog
- Press the Unblock button.
Source Code for the libraries is available and can be obtained by purchasing the number of support hours given in the right-most column and then contacting us to arrange delivery.
You may request updates to source code for six months after the date of purchase.
| Library | Description | Source Code Price |
|---|---|---|
| AdcLib | Read the four analog-to-digital channels | 2h1 |
| CanLib | Interfaces to the FlexCan and MCP2515 CAN Controller | 2h2 |
| ClkLib | Turn on and off internal clock | N.A. |
| CoprocLib | Interfaces to the ARM Co-Processor registers | N.A. |
| GpioLib | Manages General Purpose IO pins | 2h |
| I2cLib | Communication via the I2C interfaces | 2h |
| IntLib | Manages installable Interrupt Service Routines | 2h |
| KernelCallbackLib | Call Kernel functions from User Mode | N.A. |
| MapMemLib | Mapping of physical registers to virtual addresses | 2h |
| PwmLib | PWM Frequencies and duty cycles | 2h |
| RpmsgLib | RPMSG communication between main core and Cortex-M4 core | N.A. |
| SpiLib | Communication via SPI interfaces | 2h3 |
| SysinfoLib | Provides access to hardware/software information | 2h |
| UpdateLib | Programming of Image/Bootloader/Registry into on-board flash | N.A. |
| WatchdogLib | Manages the integrated Watchdog | 2h |
1No AdcLib source code for VF50 and VF61.
2No Source code for Flexcan. Source code is only available for the MCP2515 SPI CAN implementation.
3No SpiLib source code for iMX6 and iMX7.
The following table shows the dependencies between the various libraries.
A library listed in the column header requires all libraries marked in the same column underneath this header.
| Adc | Can | Clk | Coproc | Gpio | I2c | Int | KernelCallback | MapMem | Pwm | Rpmsg | Spi | Sysinfo | Update | Watchdog | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Adc | N.A. | ||||||||||||||
| Can | N.A. | ||||||||||||||
| Clk | x | N.A. | x | x | x | x | x | ||||||||
| Coproc | x | x | x | N.A. | x | x | x | x | x | x | x | x | |||
| Gpio | x | x | N.A. | x | x | x | |||||||||
| I2c | x | N.A. | x | ||||||||||||
| Int | x | x | x | N.A. | x | x | |||||||||
| KernelCallback | x | x | x | N.A. | x | ||||||||||
| MapMem | x | x | x | x | x | x | N.A. | x | x | x | x | x | |||
| Pwm | N.A. | ||||||||||||||
| Rpmsg | N.A. | ||||||||||||||
| Spi | x | N.A. | |||||||||||||
| Sysinfo | x | N.A. | |||||||||||||
| Update | N.A. | ||||||||||||||
| Watchdog | N.A. |
The table below details the libraries currently available - a consolidated library containing binary versions of these libraries, demos, sample code and change notes can be downloaded here:
The libraries can be used for CE5, CE6, WEC7 and WEC203. Use the libraries in folders as stated below:
| OS | Folder Name | Notes |
|---|---|---|
| Windows CE5 | Toradex_CE600 (ARMv4I)Debug/Release | |
| Windows CE6 | Toradex_CE600 (ARMv4I)Debug/Release | |
| Windows Embedded Compact 7 | Toradex_CE600 (ARMv4I)Debug/Release | |
| Windows Embedded Compact 2013 | Toradex_CE800 (ARMv4I)Debug/Release | Available in library release V2.0 and later |
NOTE: For VFxx libraries, check the section Toradex CE Libraries for VFxx above.
Use of this software is subject to an End user License Agreement which can be viewed here:
Source Code for the libraries is available and can be obtained by purchasing the number of support hours given in the right-most column and then contacting us to arrange delivery. You may request updates to source code for six months after the date of purchase.
The table entries are encoded as follows:
f = full support
p = partial support
- = no support
N.A. = not available
| Library | Description | Apalis T30 | Colibri T30 | Colibri T20 | PXA3xx | PXA270 | Source Code Price |
|---|---|---|---|---|---|---|---|
| ADCLib | Communicates with audio codec and four analog-to-digital channels | f | f | f | f | f | 4h |
| CANLib-SJA1000 | Interfaces to SJA1000 CAN Controller | - | f | f | f | f | 4h |
| CANLib-MCP2515 | Interfaces to MCP2515 CAN Controller | f | f | f | f | f | 4h |
| CLKLib | Manages clocks settings | f | f | f | f | f | 2h |
| CloudLib | Allows access to the Amazon Web Services (AWS) platform | f | f | f | f | f | N.A. |
| CoProcLib | Interfaces to the Co-Processor registers for Clock and Power modes | f | f | f | f | f | N.A. |
| DMALib | DMA handling, including channel allocation and DMA transfer control | - | - | - | f | f | 4h |
| FreqLib | Manages clock frequencies and core voltage of the module | f | f | f | f | f | 2h |
| GPIOLib | Manages General Purpose IO pins | f | f | f | f | f | 2h |
| I2CLib | Manages communications via the I2C interfaces | f | f | f | f | f | 2h |
| ImgInfoLib | Provides functions to work with flash images | - | - | - | f | f | 4h |
| IntLib | Manages installable Interrupt Service Routines | f | f | f | f | f | 2h |
| MapRegLib | Provides for the mapping of physical registers to virtual addresses | f | f | f | f | f | 2h |
| MemLib | Manages memory timings | - | - | - | f | f | N.A. |
| OverlayLib | RGB and YUV Overlays for use with video and images | - | - | - | f | f | 4h |
| PWMLib | Manages the PWM interfaces | f | f | f | f | f | 2h |
| SPILib / SPIDMALib | Manages the SPI interfaces (polled) | f | f | f | f | f | 2h |
| SysInfoLib | Provides access to configuration information | - | f | f | f | f | 4h |
| UpdateLib | Manages programming of Image/Bootloader/Registry in on-board flash | - | p | p | f | f | N.A. |
| WatchDogLib | Manages the integrated Watchdog | - | - | - | f | - | 2h |
Important Note: There is no further development or support on these legacy libraries. We strongly recommend to use the new Toradex CE Libraries for VFxx and iMX6!
For compatibility reasons, we first implemented some of libraries with VF50 / VF61 support using the legacy API. This includes
If you need to redownload old libraries please contact support@toradex.com
Only the Toradex Windows CE release V1.0 for Vybrid and later is supported by these legacy libraries.
We provide sample demo codes which enables user to quickly test the peripherals on Toradex CoMs.
| Sample Code | Description | Apalis T30 | Colibri T30 | Colibri T20 | PXA3xx | PXA270 |
|---|---|---|---|---|---|---|
| Camera Demo | Parallel camera interface demo project | f | f | f | - | - |
Camera demo project build setup:
1. Download Windows CE Software Libraries for PXA and Tegra Modules.
2. Extract the content in a directory.
3. Keep CameraDemo project inside the LibsDemos directory.
4. Copy \CameraTegra\VSproperty directory files to \wincelib_bin_V2_0bis_2868(Windows CE software library directory).
5. If Toradex SDK is not installed, download and install SDK.
6. Open the project(".sln" or ".vcproj") file in Visual studio 2008 and build the project.
NOTE: If you have any questions or feedback, please contact our support.
