Upcoming Toradex Easy Installer 5.7 Maintenance Release 1 |
TEI-1036 | Known Issue | Tezi crashes without display adapter | Verdin iMX8M Mini | | Low | No |
Description: Tezi 5.7.0 is crashing on 0068 SOM if no display adapter is connected on DSI Workaround: Connect a display adapter |
Toradex Easy Installer Q2 2021 Quarterly Release. Learn more on https://www.toradex.com/news/530-release-of-toradex-easy-installer-for-imx-and-tk1-system-on-modules |
TEI-790 | Feature Request | Scale the Progress Window to the Screen Width | Verdin iMX8M Plus, Verdin iMX8M Mini | Update System | Low | No |
Description: Correctly scale the progress window to the screen width |
TEI-778 | Known Issue | AutoInstall the EasyInstaller doesn't Automatically Reboot | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis iMX8 | | Low | No |
Description: If one installs an image which requires a newer Toradex Easy Installer and one wants to use the autoinstall feature one can provide the newer installer alongside the image to be installed. Then the new installer is installed first followed by the installation of the image.
The versions 2.0b4-2.0b7 however do not automatically reboot after installation of the newer Toradex Easy Installer but rather show the standard dialogue /Power off/Reboot/Return to menu/ instead |
TEI-732 | Known Issue | Get Rid of Spurious /etc/issue | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis iMX8 | Toradex Feature | Low | No |
Description: Get rid of spurious /etc/issue as likely /etc/tezi-version should be used. |
TEI-611 | Known Issue | Restoring Completely Erased NAND Flash Fails | Colibri iMX7, Colibri iMX6ULL | Flash | Low | No |
Description: Restoring a completely erased NAND flash fails using Toradex Easy Installer 2.x. Workaround: Use Toradex Easy Installer 1.8 via recovery mode instead and erase the flash before installation. |
TEI-30 | Feature Request | Add Feed to the List if OK Button is Pressed in Feeds Dialog | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: When adding a custom feed, pressing OK should also add the entered feed to the feeds list. |
TEI-773 | Fixed | Toradex Easy Installer Hangs Installing Images With 'autoinstall' Enabled. | | | Low | No |
Description: The Toradex Easy Installer may hang trying to installing images with the 'autoinstall' property enabled in its image.json file. |
TEI-708 | New Feature | Toradex Easy Installer support for Verdin iMX8M Mini V1.1A/B with Verdin DSI to HDMI Adapter V1.1A | Verdin iMX8M Mini | HDMI | Low | No |
Description: Add support for Verdin iMX8M Mini V1.1A/B with Verdin DSI to HDMI Adapter V1.1A. |
TEI-676 | Fixed | Default Display Interface Detection Not Working | Apalis iMX8X | Graphics, RGB | Low | No |
Description: Unfortunately, the default display interface detection (required on Apalis iMX8 QuadXPlus 2GB ECC IT without DSI to HDMI chip being assembled) is not working as it seems to depend on some userspace intervention not happening during boot when executed from rc.local. This can be seen by the following message being printed during boot:
sh: bad number
On the aforementioned module, this leads to no UI being visible on parallel RGB. Workaround: Either use VNC to remotely connect to the board or type the following in the serial debug console to get parallel RGB working
/ # killall tezi weston dbus-daemon
/ # rm /var/run/dbus/pid
/ # /etc/rc.local |
TEI-569 | Fixed | Authentication Failed Trying to Connect Via VNC | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: While our VNC backend works quite stable now I regularly get an "Authentication failed" message the first time I try to connect to a just power-cycled module running Tezi. It does not seem to depend on whether Tezi got brought up in recovery or not, whether Ethernet or RNDIS is used and also waiting a few seconds before trying to connect does not seem to change anything. In average I get it about once every 6 power-cycles. I use Gnome's Remote Desktop Viewer aka Vinagre 3.22.0 on Fedora 30. |
TEI-556 | New Feature | Make sure to Erase Environment when installing Toradex Easy Installer | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Bootloader | Low | No |
Description: By default the flash is not erased when installing a new image, but simply overwritten by the new image. The U-Boot environment however is typically not overwritten. This might influence the next image installation. Since installing the Toradex Easy Installer onto a device usually means that one would like to have the module behave like after a factory reset, installing the Toradex Easy Installer image should erase the Environment by default. |
TEI-503 | New Feature | Support custom ports for services announced via Zeroconf | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Colibri VF50, Colibri VF61, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Add support to use a custom port for services announced via Zeroconf |
TEI-501 | New Feature | Support HTTPS Servers Announced Through Zeroconf | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Add support to announce servers with HTTPS trough Zeroconf. |
TEI-500 | Fixed | URLs With Equal Signs are not Possible to Pass Through Zeroconf | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: URLs with equal signs are not possible to pass through Zeroconf. |
TEI-496 | Fixed | VNC backend screenshare instance crashes at times | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: VNC backend screenshare instance crashes at times. Workaround: Unfortunately, once it crashed the Toradex Easy Installer needs to be rebooted to be able to try again. |
TEI-493 | New Feature | Add support for Apalis iMX8QXP 2GB | Apalis iMX8X | Buildsystem | Low | No |
Description: Add support for Apalis iMX8QXP 2GB. |
TEI-491 | Fixed | VNC: keyboard layout issue | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: If connecting to the Toradex Easy Installer with VNC the keyboard layout is messed up. E.g. when using a Swiss-German configuration one can't input characters like slash /. It messes up the keyboard input so hard that not even US input will work. Workaround: As a workaround switch the host-side to US-English layout as follows: setxkbmap usvncviewer ... |
TEI-487 | Fixed | Bad output to Parallel RGB (both LCD panel / VGA) | Colibri iMX6 | RGB, VGA | Low | No |
Description: Tezi 2.0b4 with Colibri iMX6 shows a color-messy picture on Parallel RGB outputs. |
TEI-472 | Fixed | SD Card not Usable | Colibri iMX6ULL | SDIO/SD/MMC | Low | No |
Description: SD card is not usable. Workaround: Load images via Ethernet/Internet or use a USB memory stick. |
TEI-236 | New Feature | Add Serial Command Line Support for Toradex Easy Installer | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Support controlling Toradex Easy Installer from the serial console. |
TEI-138 | New Feature | Provide HTTP API | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Provide a HTTP API to control the Toradex Easy Installer. Please contact your Toradex sales representative for further details. |
TEI-100 | New Feature | Use host name with serial number | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Ethernet | Low | No |
Description: Use host name with serial number to distinguish multiple modules on a network. This is useful when using mDNS or a DHCP infrastructure which supports client provided host names. |
TEI-265 | New Feature | Support Windows Host For Recovery | Apalis iMX8X, Colibri iMX8X, Apalis iMX8 | Buildsystem | Low | No |
Description: Support Windows host for Toradex Easy Installer recovery. Workaround: For the time being just use a Linux workstation optionally running in a VM of choice. |
TEI-190 | New Feature | Move all Supported Modules to Mainline/Upstream Linux kernel | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30 | Kernel, Toradex Feature | Low | No |
Description: Move all supported modules to mainline/upstream based toradex_5.4.y Linux kernel. |
TEI-167 | New Feature | Display in multiple screens at the same time | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis iMX8 | Graphics | Low | No |
Description: Currently it is not possible to display the GUI in multiple screens at the same time. |
TEI-142 | Fixed | Version Comparison does not Support new Versioning Scheme | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: The Toradex Easy Installer compares version numbers when the "isinstaller" property is set to "true" to determine if there is a newer Toradex Easy Installer available. However, this version comparison code currently crashes when version numbers with different amount of segments are compared (e.g. 1.8 vs. 2.0.0). Furthermore the code does not support semantic Versioning, in particular the pre-release part of the version number is not taken into account. Workaround: Since this only affects Toradex Easy Installer no work around required on customers end. |
TEI-121 | New Feature | Implement VNC support for Weston | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Implement VNC support for Weston. |
TEI-111 | Fixed | VNC not working when DVI/HDMI not plugged in | Apalis iMX8X | Toradex Feature | Low | No |
Description: If DVI/HDMI is not plugged in Weston does not start. As a result, also VNC can't start. |
TEI-108 | Fixed | Apalis iMX8QM: Toreadex Easy Installer Does not Boot With PCIe Disabled | Apalis iMX8 | PCIe | Low | No |
Description: The Toradex Easy Installer crashes during boot if the regular off-module PCIe link can not be brought up. This is e.g. the case on the Apalis Evaluation Board if the PCIe switch is kept in reset (e.g. by removing jumper X3-4) or on Ixora if no mini-PCIe device is plugged in. Workaround: On the Apalis Evaluation Board make sure the PCIe switch is not kept in reset (e.g. by placing jumper X3-4). On Ixora make sure a mini-PCIe device is plugged in. Alternatively, one may completely disable any PCIe functionality by specifying a tdxargs of initcall_blacklist=imx_pcie_init from within U-Boot:
setenv teziargs initcall_blacklist=imx_pcie_init
fastboot 0 |
TEI-104 | Fixed | Current uuu Version is Too Low | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis iMX8 | Buildsystem | Low | No |
Description: The current uuu version is too low in the Toradex Easy Install 2.0b3. Workaround: You may manually update to a later uuu version downloadable from here:
https://github.com/NXPmicro/mfgtools/wiki#How-to-use-UUU-on-Windows |
TEI-102 | Fixed | Apalis iMX8 Kernel Crash on Ixora | Apalis iMX8 | Kernel | Low | No |
Description: Kernel crashes when using Toradex Easy Installer 2.0b3 to recover an Apalis iMX8 module on a Ixora carrier board. Workaround: Use previous Toradex Easy Installer or the Apalis Evaluation Carrier board. |
TEI-226 | New Feature | Support Server Discovery using Zeroconf Technologies | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Use zeroconf technology to let the Toradex Easy Installer find an appropriate image server (e.g. using DNS-SD, possibly also with mDNS support). |
TEI-194 | Fixed | Add --xattr-include=* to tar | Apalis iMX8X, Colibri iMX8X, Apalis iMX8 | Flash | Low | No |
Description: The CONFIG_EXT4_FS_SECURITY Linux kernel configuration was missing which prevented xattr from working properly. |
TEI-171 | Fixed | Dialogs can get behind main window and make it not responsive | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Graphics | Low | No |
Description: When one clicks on the main window while a modal dialog is open, the dialog gets moved behind the main window. Since the dialog locks input to the parent window, the main window is now unresponsive and the Toradex Easy Installer is not usable. Workaround: There is no workaround for this. Restart the Easy Installer and avoid clicking out of the window in focus. |
TEI-168 | New Feature | Add support for Apalis iMX8X | Apalis iMX8X | Kernel | Low | No |
Description: Add support for Apalis iMX8X. |
TEI-160 | New Feature | Add uuu recipe | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX8 | Toradex Feature | Low | No |
Description: Currently the uuu utility used by tezi is pulled from a precompiled binary in tezi-run-metadata. A proper recipe for uuu is needed. |
TEI-155 | Fixed | No Icon Shown in Image List | Apalis iMX8 | Buildsystem | Low | No |
Description: While the tezi.png icon is deployed with the package it is currently not shown in the image list as it is missing from image.json. |
TEI-137 | Fixed | Un- and Re-Plugging the Same USB Memory Stick Keeps Re-Adding its Images to the List | Verdin iMX8M Mini | Toradex Feature | Low | No |
Description: Un- and re-plugging the same USB memory stick keeps re-adding its images to the list. |
TEI-119 | New Feature | Provisioning Container Images For TorizonCore | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Apalis iMX6, Colibri iMX6, Apalis iMX8 | Toradex Feature | Low | No |
Description: TEZI provisioning container images on TorizonCore |
TEI-115 | Fixed | Missing SKU Support | Colibri iMX8X, Apalis iMX8 | Kernel | Low | No |
Description: The USB product IDs of the following SKUs are currently missing in the recovery scripts:
47: Apalis iMX8 QuadMax 4GB IT, 48: Apalis iMX8 QuadPlus 2GB Wi-Fi / BT, 32: Colibri iMX8 QuadXPlus 2GB IT, 33: Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth |
TEI-114 | Fixed | Set hostname properly in certificate | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis iMX8 | Toradex Feature | Low | No |
Description: The certificates CN does not match the modules hostname. |
TEI-112 | New Feature | Fix initial date time | Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis iMX8 | RTC | Low | No |
Description: Initial time of the Toradex Easy Installer without properly set RTC is rather random and might be in the distant past. This leads to RDP certificates with old validate dates. |
TEI-110 | New Feature | Add zstd support | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Colibri VF50, Colibri VF61, Apalis TK1, Colibri T20, Colibri T30, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Add support for the zstd (Zstandard) data compression algorithm. |
TEI-105 | New Feature | Set hostname/avahi announced hostname from serial number | Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Ethernet | Low | No |
Description: Announce unique hostname via mDNS. |
TEI-187 | Fixed | The Ethernet Link May Constantly go Up/Down | Colibri iMX6ULL | Ethernet | Low | No |
Description: The Ethernet link may constantly go up/down with the following messages in dmesg:
[ 2.237374] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 2.739249] configfs-gadget gadget: high-speed config #1: RNDIS
[ 2.739922] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ 11.385522] fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 11.385637] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.385379] fec 20b4000.ethernet eth0: Link is Down
[ 16.385482] fec 20b4000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[ 20.385077] fec 20b4000.ethernet eth0: Link is Down Workaround: Re-loading the Toradex Easy Installer may recover the Ethernet link to a stable condition. |
TEI-164 | New Feature | Add support for Colibri iMX8X | Colibri iMX8X | Kernel | Low | No |
Description: Integrate support for Colibri iMX8X. |
TEI-157 | Fixed | Flashing Image with 3.10 L4T Kernel Fails to Boot | Apalis TK1 | Flash | Low | No |
Description: Images using the 3.10 L4T Kernel which get flashed with Tezi 2.0b1 do not boot. The kernel is not able to mount the file system and reports an error: JBD2: Unrecognised features on journal |
TEI-154 | New Feature | Disconnecting RDP Leaves Seat Open | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Ethernet, Graphics | Low | No |
Description: Disconnecting the RDP client leaves the mouse cursors on the display. |
TEI-153 | New Feature | Using RDP leaks memory | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Ethernet, Miscellaneous Peripherals, RAM | Low | No |
Description: Using remote connection with RDP constantly leaks memory. Workaround: Restart the Toradex Easy installer if needed. |
TEI-152 | Fixed | Avoid using http caching when requesting images from feeds | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: When http caching is enabled, using the Refresh button to load newly added tezi images may not work, as the client is taking locally cached information. Workaround: Reboot tezi to refresh caches |
TEI-141 | New Feature | Support uuu in containers without udev | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Apalis iMX8 | Toradex Feature | Low | No |
Description: Support uuu without libudev support (e.g. for containerized environments). |
TEI-15 | Fixed | Replace Tux with a Toradex Easy Installer icon during boot | Colibri iMX6ULL | Graphics, RGB | Low | No |
Description: When launching Tezi the Linux penguin is quickly shown before the actual Tezu UI shows up. We will replace it with a Toradex Easy Installer icon. |
TEI-365 | New Feature | Add support for Apalis iMX8 | Apalis iMX8 | Kernel | Low | No |
Description: Add support for iMX8 modules in the tezi images |
TEI-259 | New Feature | Update to Qt5 | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Colibri T30, Apalis T30 | Graphics | Low | No |
Description: Updated to Qt5 |
TEI-169 | New Feature | Update OpenEmbedded Layers to Thud | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Buildsystem | Low | No |
Description: Updated Openembedded layers to thud |
TEI-159 | New Feature | Port Toradex Easy Installer to thud | Verdin iMX8M Mini, Apalis iMX8X, Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Ported Openembedded layers to thud |
TEI-43 | Fixed | Add support for IMX6ULL 512MB WB V1.1A | Colibri iMX6ULL | Kernel | Low | No |
Description: When trying to install a Toradex Easy Installer from a running Toradex Easy Installer in a iMX6ULL 512MB WiFi, the image will be displayed as incompatible. Workaround: Download the Easy Installer image provided in our developer site. Extract the zip files and look for the image.json. In the supported_product_ids field add "0045" to the list. The image will now appear in the Easy Installer as installable. |
TEI-34 | New Feature | Add extra information in the prompt console | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Toradex Feature | Low | No |
Description: Added link to Toradex Easy Installer article in the prompt welcome meassage. |
TEI-31 | Fixed | Add --xattr-include=* to tar | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Flash | Low | No |
Description: When the Easy Installer untars the tarballs during installation, extended attributes do not get retrieved by tar if --xattrs-include=* is not passed as an argument together with --xattrs. This is in contradiction with the tar documentation, according to which --xattrs on its own suffices for tar to extract extended attributes. |
TEI-26 | Fixed | Distro Boot Only Works From The First Partition | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30 | Bootloader | Low | No |
Description: Turns out our current boot.scr script uses ${bootpart} rather than ${distro_bootpart} to reference the partition. Luckily, U-Boot just assumes the first partition if nothing is passed e.g. in a load command. That is why distro boot worked at all at least from the first partition. Workaround: First, you have to make sure whatever partition you want to boot from is actually set to active boot in the partition table.
Then, change the boot script making sure you use ${distro_bootpart} rather than ${bootpart}. You may re-create the script from a text file as follows:
mkimage -T script -C none -n 'Distro boot script' -d boot.txt boot.scr |
TEI-13 | New Feature | Allow to Control Behavior of mkfs.ext Utilities Through mke2fs.conf | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30, Apalis iMX8 | Flash | Low | No |
Description: Some file system settings are not available through command line of the mkfs utilities. Currently the settings file is stored in /etc/mke2fs.conf, which is in the read only part. Hence the current situation prevents to use a custom mke2fs.conf file. Workaround: We have added the tune2fs utility into the tezi images, which can be invoked in the wrapup script to change the filesystem attributes after installation. |
TEI-6 | Fixed | After Recovery From Erased NAND Flash the System Remains Unbootable | Colibri iMX7, Colibri iMX6ULL | Bootloader | Low | No |
Description: If the complete NAND gets erased, e.g. by the U-Boot command 'nand erase.chip' the BCB data structure at the beginning of the NAND needs to be rewritten in order to boot from NAND.
The Toradex Easy Installer does this as part of a missing Config Block recovery process. Workaround: If you erase the NAND chip, do not write the Config Block in U-Boot. Recover with the Toradex Easy Installer which will interactively ask for the Config Block data and write the BCB. |
Apalis TK1 maintenance release |
TEI-613 | New Feature | Toradex Easy Installer May Hang During Boot | Apalis TK1 | Kernel, SATA | Low | No |
Description: The Toradex Easy Installer version 1.8 may hang during boot with the following message shown last on its serial debug UART:
[ 0.456751] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
Resp. without quiet:
[ 2.567691] tegra-ahci 70027000.sata: 70027000.sata supply target-12v not found, using dummy regulator Workaround: This particular Linux kernel version seems to be susceptible to a AHCI SATA initialisation issue most likely related to clocking/PLL only happening on a few modules at lower temperatures. As AHCI SATA was never officially supported in the Toradex Easy Installer we just disabled it for now in the version 1.9 maintenance release. Alternatively, using any of the later Toradex Easy Installer versions like 2.0b6 also alleviates the issue. |
TEI-77 | New Feature | Allow Executing an Error Script if Installer Fails | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30 | Toradex Feature | Low | No |
Description: Execute an error script in case the installer fails installing the image. |
TEI-22 | New Feature | Load Toradex Easy Installer Configuration from SD card (used for kits) | Colibri iMX8X, Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis iMX8 | SDIO/SD/MMC | Low | No |
Description: Start Toradex Easy Installer based on configurations defined on an SD card |
TEI-18 | New Feature | Allow Disabling Default Feeds | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30 | Toradex Feature | Low | No |
Description: Allow disabling default feeds by using a tezi_config.json on an external media. This can be used to prevent Toradex Easy Installer from showing any images from the Internet. |
TEI-17 | New Feature | Show More Information for Images | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1, Apalis T30 | Toradex Feature | Low | No |
Description: Show detailed information of the selected image. The image.json description field will be shown more prominently as the image list appearance has been improved. |
TEI-8 | New Feature | Support Colibri iMX6ULL V1.1 SKUs | Colibri iMX6ULL | Kernel | Low | No |
Description: Add support for the Colibri iMX6ULL V1.1 versions. Older Toradex Easy Installers have problems with Ethernet on these SoMs. |
TEI-83 | Fixed | Apalis TK1 PCIe Gigabit Bring-up Issue | Apalis TK1 | Ethernet, PCIe | Low | No |
Description: Forward ported commit 7ad9771527d2 ("apalis-tk1: fix pcie reset for reliable gigabit ethernet operation") was never validated. Turns out it does not work and may lead to PCIe gigabit bring-up issues. |
TEI-82 | Fixed | Higher Speed SD cards do not Work | Apalis T30 | SDIO/SD/MMC | Low | No |
Description: Images on SD cards which do support faster modes than High Speed may not work. Workaround: Use USB flash drive or SD cards which only support High Speed modes. |
TEI-81 | Fixed | Mouse/Keyboard Stops Responding for 10-15 Seconds | Apalis T30 | Kernel | Low | No |
Description: After startup mouse and keyboard sometimes stops responding completely for 10-15 seconds. The system seems to recover on its own, and mouse/keyboard continue to work just fine. |
TEI-80 | Fixed | Installing an Image May Rarely Soft Lockup | Apalis T30 | CPU | Low | No |
Description: Image installation may rarely soft lockup. This has been observed with a rather slow internet connection. Workaround: Just re-trying the installation even without power-cycling may work. |
TEI-16 | Fixed | Boot hangs on 1.7 for Colibri iMX6 | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6 | Bootloader | Low | No |
Description: Toradex Easy Installer 1.7 does not work for Colibri iMX6DL 512MB IT V1.0A. |
|
TEI-291 | New Feature | Support Apalis T30 Modules | Apalis T30 | Kernel | Low | No |
Description: Provide the Toradex Easy Installer for Apalis T30. |
TEI-85 | New Feature | Add support for new Coilbri iMX6ULL SKUs | Colibri iMX6ULL | Kernel | Low | No |
Description: Add support for Colibri iMX6ULL 512MB IT V1.0A. |
TEI-78 | New Feature | eMMC Communication Errors when Running with HS400 at 100MHz | Colibri iMX7 | Flash | Low | No |
Description: The Kernel reports eMMC errors such as "mmcblk0: error -84 transferring data" during image installation. In some cases it might cause the installation process to fail. |
|
TEI-247 | New Feature | Implement Boot Configuration Block Restore for Raw NAND Devices | Colibri iMX7, Colibri iMX6ULL | Flash | Low | No |
Description: When raw NAND devices are erased completely (e.g. using nand erase.chip in U-Boot), the boot configuration block has not been restored so far. With this release the Toradex Easy Installer will write a boot configuration block whenever the config block is missing (which is located in the same erase block. |
TEI-96 | Fixed | Use Correct VGA Timings for parallel RGB | Apalis iMX6, Colibri iMX6 | RGB, VGA | Low | No |
Description: The timing used on the Colibri iMX6 parallel RGB output (which is also converted to VGA on the Colibri Evalution Board) has a VGA resolution but is not the standard VGA timing. The same applies to the Apalis iMX6 parallel RGB as well as native VGA output. Workaround: Use the Toradex Easy Installer with a different screen or a different graphical output such as HDMI/DVI-D or over network using VNC. |
TEI-93 | Fixed | Offset in Sector does not Allow Minimal Offset | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Flash | Low | No |
Description: The field offset_in_sectors allows to specify a particular partition offset. By default, the minimal valid offset is used (for the first partition this is 8192 sectors/4MiB, for the subsequent ones depending on the size of the previous partition). Due to a "off-by-1" error the minimal offset leads to an error "Fixed partition offset too low". Workaround: Since the minimal offset is the default anyway, do not specify "offset_in_sectors" if the minimal offset is required. |
TEI-89 | Fixed | Installation Process Blocks When Lots of Messages Are Writen to stderr | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Toradex Feature | Low | No |
Description: Installation Process might block on some tar files if GNU tar writes lots of warnings/errors to stderr. E.g. when the system clock is not correctly set (causing tar to print "time stamp .. in the future" warnings) or bsdtar has been used which uses header keywords not known by GNU tar (causing "Ignoring unknown extended header keyword" warnings). Workaround: Make sure system time is correct either by using NTP (connect the module to the Internet) or manually using the date command (e.g. "date -s 2018-04-10"). Also, make sure the tarball has been packed using GNU tar to avoid header keyword warnings. |
TEI-65 | Fixed | Prepare/Wrap-up Script Timeout is Ignored by the Toradex Easy Installer | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Toradex Feature | Low | No |
Description: The Toradex Easy Installer executes prepare/wrap-up scripts with a timeout of 30s. However, if the scripts exceed the 30s, the installer ignores that and simply continues executing, assuming the script succeeded.
Instead of using a timeout without a reasonable error handling wait forever until the script ended. Also print a warning after 30s. |
This release supports image/configuration format 1 and 2! Using fw_setenv in wrap-up scripts is not supported anymore since the U-Boot environment utilities in Toradex Easy Installer no longer provide a default environment and default configuration file. Please migrate to use "u_boot_env" property in image.json and point to a U-Boot environment text file. |
TEI-304 | New Feature | Allow Writing U-Boot Environment from a Text File | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Bootloader, Flash | Low | No |
Description: Allow writing a custom U-Boot environment from a text file provided alongside the with the image. Workaround: Use fw_setenv in a wrap-up script. |
TEI-302 | New Feature | Support USB Device Mass Storage and RNDIS | Apalis TK1 | USB | Low | No |
Description: Support USB device mass storage and RNDIS access in the Toradex Easy Installer for Apalis TK1. Workaround: Revert to regular Ethernet, SD card or USB host support for now. |
TEI-292 | New Feature | Use curl Instead of wget to Download Images | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Ethernet | Low | No |
Description: So far Toradex Easy Installer used wget to download images. The console utility curl provides better protocol support and more features. |
TEI-290 | Fixed | Erase Flash Not Working | Apalis TK1 | Flash, Kernel | Low | No |
Description: Erase flash currently does not seem to work probably due to missing downstream Linux kernel discard functionality. Workaround: Manually erase flash e.g. using U-Boot's 'emmc erase' command. |
TEI-288 | Fixed | Clipped Screen Due to VGA Resolution/Timing Not Being Fully VESA Compliant | Apalis iMX6, Colibri iMX6 | Graphics, Kernel, RGB, VGA | Low | No |
Description: Our current VGA resolution timings are not fully VESA compliant which may lead to the screen getting clipped on the right side. |
TEI-287 | Fixed | Re-enabling Mass Storage after Ejecting Mass Storage Devices Fails | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Flash | Low | No |
Description: When using the USB mass storage emulation functionality and ejecting a device, re-enabling the USB mass storage emulation does not show the USB mass storage partitions again. Workaround: Restart Toradex Easy Installer and enable the USB mass storage emulation again. |
TEI-246 | New Feature | Add Barcode Support for Config Block Dialog | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | ConfigBlock | Low | No |
Description: Allow to use a USB attached bar code reader to fill fields when the config block recovery dialog is shown. |
TEI-210 | New Feature | Support GUID Partition Table (GPT) | Apalis iMX6, Colibri iMX6, Apalis TK1 | Flash | Low | No |
Description: By default the Toradex Easy Installer does generate partition table in the DOS format. This adds support for GUID partition tables (GPT) by using the "table_type" property on block device level. |
TEI-204 | New Feature | Support Capacitive Touch Display 7" Parallel | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6 | Capacitive Touch, Graphics, RGB | Low | No |
Description: Add support for "Capacitive Touch Display 7" Parallel" |
TEI-195 | Fixed | Erase Flash (c) Not Supported | Apalis TK1 | Flash | Low | No |
Description: The Toradex Easy Installer for Apalis TK1 currently does not support the 'Erase Flash (c)' button functionality. Workaround: Either use the "mmc erase" U-Boot command or format your eMMC from Linux user space. |
TEI-72 | Fixed | Make Sure That uid and gid do not get Changed by tar | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Flash | Low | No |
Description: So far tar has been used without special setting on unpacking. It seems that the default behavior of tar translates textual user/group names to user/group ids according to the local user/group database. In Toradex Easy Installer case this means the user/group database of the temporary installer. This might lead to wrong user/group ids in the target rootfs. With 1.4 Tezi will use the --numeric-owner argument to make sure that all files/directories are created with user/group ownership by id as stored in the tar file. Workaround: Add --numeric-id to the tar command when creating the rootfs archive.
http://cgit.openembedded.org/openembedded-core/tree/meta/classes/image_types.bbclass#n128 |
TEI-71 | Fixed | Toradex Easy Installer 1.3 does not Detect Ethernet Changes | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Ethernet | Low | No |
Description: Toradex Easy Installer does not detect when Ethernet gets disconnected and does not recognize when a different Network gets connected after having a previous connection established. |
TEI-69 | Fixed | RNDIS Sometimes not Working | Colibri iMX6ULL | USB | Low | No |
Description: RNDIS is only working sometimes. Workaround: Retry by rebooting/recover the module again. Use Ethernet instead. |
TEI-68 | New Feature | Update libusbgx Library to Latest Upstream Version | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | USB | Low | No |
Description: Upstream libusbgx accepted our implementation of OS Descriptor support. |
TEI-67 | New Feature | Support ACL and xattr | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Flash | Low | No |
Description: Make sure Toradex Easy Installer preserves/write extended attributes (xattrs) and ACL (access control lists) if they are present in a source tar file. |
TEI-64 | Fixed | No Link-Local IPv6 Adresses on Ethernet Interface | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Ethernet | Low | No |
Description: The ethernet interface (eth0) does not get a link-local IPv6 address assigned. This prevents IPv6 neighbor discovery protocol from working (SLAAC). |
TEI-63 | Fixed | Missing Large File Support | Colibri iMX7, Apalis iMX6, Colibri iMX6, Apalis TK1 | Flash, Kernel | Low | No |
Description: The Toradex Easy Installer does not have the large file support distro feature (DISTRO_FEATURES += "largefile") enabled. This may lead to issues trying to flash file system archives which are bigger than 2GB (e.g. like the JetPack one). |
TEI-57 | Fixed | fw_setenv not Working on Colibri iMX7/iMX6ULL | Colibri iMX7, Colibri iMX6ULL | Bootloader, Flash | Low | No |
Description: fw_setenv cannot be used in a wrap-up script due to wrong configuration file. |
TEI-56 | Fixed | Marketing Information Left Unpacked When using Locally Stored Image | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Toradex Feature | Low | No |
Description: When using a locally stored image (e.g. on a SD-card or USB drive) Tezi unpacks marketing.tar and leaves it unpacked after installation. While Tezi keeps using the slides on next installation from a local media, the image cannot be uploaded to a server without creating a tar again. Workaround: Recreate the marketing tar again if required. |
|
TEI-283 | New Feature | Add 3rp Party Feed for Images Provided by Toradex Partners | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6, Apalis TK1 | Toradex Feature | Low | No |
Description: Add an additional feed for 3rd party images. |
TEI-240 | New Feature | Support Apalis TK1 Modules | Apalis TK1 | Buildsystem | Low | No |
Description: Provide the Toradex Easy Installer for Apalis TK1. |
TEI-329 | New Feature | Print Version on Serial Output | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6 | UART | Low | No |
Description: Print version of Toradex Easy Installer on the serial output |
TEI-326 | Fixed | Support 32-bit Linux Distributions | Colibri iMX7, Colibri iMX6ULL, Apalis iMX6, Colibri iMX6 | Buildsystem | Low | No |
Description: Support 32-bit Linux distributions by providing imx_usb as a 32-bit binary. |
TEI-281 | Fixed | WinCE Images with Records Containing empty Erase Blocks Lead to Error During Flashing | Colibri iMX7 | Toradex Feature | Low | No |
Description: Flashing a WinCE image with empty pages between resources leads to a flashing error: "Short read, expected X bytes.". |
TEI-280 | New Feature | Improve RAM settings for Colibri iMX7 | Colibri iMX7 | Bootloader, RAM | Low | No |
Description: Use optimized RAM timings as we found some issues on some modules and in our temperature testing. |
TEI-279 | New Feature | Provide Mechanism to Manage External HTTP Servers (feeds) | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: This adds a new dialog to manage external/additional http image lists directly within Toradex Easy Installer. Allow to disable/enable image lists and add secondary image lists for nightly builds/testing images. |
TEI-245 | New Feature | Consider splitting meta-toradex-tezi | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Buildsystem | Low | No |
Description: + |
TEI-218 | New Feature | Support Colibri iMX7 Dual 1GB (eMMC) Modules | Colibri iMX7 | Kernel | Low | No |
Description: Support Colibri iMX7 Dual 1GB modules using eMMC flash. |
TEI-217 | New Feature | Support Colibri iMX6ULL Modules | Colibri iMX6ULL | Kernel | Low | No |
Description: Support Colibri iMX6ULL modules using raw NAND flash. |
TEI-214 | New Feature | Use unified Toradex Easy Installer for Colibri iMX7 modules | Colibri iMX7 | Kernel | Low | No |
Description: Unified Toradex Easy Installer for Colibri iMX7 modules |
TEI-196 | Fixed | Do not Mux PWM Pins as Output | Colibri iMX7, Apalis iMX6, Colibri iMX6 | PWM | Low | No |
Description: The PWM B, C and D pins are not used by the Toradex Easy Installer but still muxed as PWM and output by default (PWM A is used for display brightness). This might be problematic for designs which use the pins for a different purpose. Do not mux PWM B, C and D. |
TEI-315 | New Feature | Validate JSON File Before Start Writing Image | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Flash | Low | No |
Description: The Toradex Easy Installer does not validate the JSON file before writing the image. Important parts could be missing. A JSON validation step helps to detect issues early and prevent failures during the flashing procedure. |
TEI-311 | New Feature | Add JSON Property to Erase Partitions/Devices Before Flashing | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Flash | Low | No |
Description: Add per partition/block device erase option. This can be useful e.g. to get rid of the U-Boot environment by adding a "erase" property to the "mmcblk0boot0" block device node. |
TEI-258 | Fixed | Config Block Can Get Lost After Erasing eMMC If No Image Is Flashed | Apalis iMX6, Colibri iMX6 | ConfigBlock | Low | No |
Description: On devices with eMMC the Config Block gets temporarily stored in RAM during erase operation. When turning off during erasing or immediately after, the Config Block can get lost. Workaround: Wait until erase completed and additional 50 seconds until write cache timeout passed or flash an image (which will force the write cache flush). |
TEI-257 | Fixed | Missing Null Check on JSON Content | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: Missing null check on JSON file content. If a JSON file contains any null fields, unexpected behaviour will result. |
TEI-256 | Fixed | Flashing Over a Previously Installed Antmicro Android Image Might Fail | Apalis iMX6 | Flash | Low | No |
Description: In case a module has an Antmicro provided Android image installed, flashing a new image might fail. Workaround: Erase flash before installing the new image. |
TEI-255 | Fixed | SPL Tries Booting From eMMC When Entered Recovery Mode via Fallback | Apalis iMX6, Colibri iMX6 | Bootloader | Low | No |
Description: A module enters the recovery mode implicitly e.g. when no bootloader has been found (typically after erasing flash). Using Toradex Easy Installer recovery in this case fails unexpectedly. The downloaded SPL tries to boot from eMMC. Workaround: Enter recovery mode explicitly using the documented methods. |
TEI-252 | Fixed | Erase Flash Broken | Colibri iMX7 | Flash | Low | No |
Description: Drücken diesen da 'Erase Flash (c)' machen alles kaputt! |
TEI-251 | Fixed | Flashing Colibri iMX7S 256MB V1.1A or Colibri iMX7D 512MB V1.1A Renders Them Unbootable | Colibri iMX7 | Bootloader | Low | No |
Description: Unfortunately the Toradex Easy Installer currently does not take into account, that those early tapeout/stepping of the i.MX 7 SoC suffer a NAND flash issue requiring a software workaround.
Starting with this version of Toradex Easy Installer it will prevent installation of any images on such modules. |
TEI-229 | Fixed | U-Boot Continues Booting When Entered Recovery Mode via Fallback | Colibri iMX7 | Bootloader | Low | No |
Description: A module enters the recovery mode implicitly e.g. when no bootloader has been found (typically after erasing flash). Using Toradex Easy Installer recovery in this case fails unexpectedly. The downloaded U-Boot tries to boot from local storage and network. Workaround: Enter recovery mode explicitly using the documented methods. |
TEI-225 | New Feature | Allow multiple image JSON files per directory | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: All JSON files starting with "image" will now picked up on a local media. Images fetched via http can have multiple references to the same folder. |
TEI-224 | Fixed | Some Volatile Directories are Missing | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: Some volatile directories are missing resulting in tools needing them failing.
E.g. fw_printenv and fw_setenv which access and modify the U-Boot environment fail as follows:
/ # fw_printenv
Error opening lock file /var/lock/fw_printenv.lock
/var/lock is a symlink to /run/lock, but /run/lock does not exist. Workaround: Create the missing directories with:
/ # /etc/init.d/populate-volatile.sh start |
TEI-223 | Fixed | Enable Write Permission for Boot Partitions by Default | Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: eMMC boot partitions are read-only by default. The Toradex Easy Installer unlocks them only when actually flashing something. Utilities such as fw_setenv on the command line, or writing the boot partitions via USB mass storage emulation does not work. Workaround: To use fw_setenv the boot partition can manually be unlocked using "echo 0 > /sys/block/mmcblk0boot0/force_ro". |
TEI-222 | Fixed | Allow network image lists for unattended installation even without Internet | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: If there is no Internet connection, tezi.toradex.com can not be reached which creates an error and stops processing image lists downloaded over network connectivity. Workaround: Use image on local media or make sure there is Internet connection available. |
TEI-216 | Fixed | USB Host port does not work on Colibri iMX7 Dual when the installer booted from flash | Colibri iMX7 | USB | Low | No |
Description: USB Host port does not work on Colibri iMX7 Dual when the Toradex Easy Installer has been booted from flash. Workaround: Use Toradex Easy Installer via recovery mode or use USB OTG port. |
TEI-215 | Fixed | Make sure legacy boot script can handle Toradex Easy Installer on raw NAND flash | Colibri iMX7 | Bootloader, Flash | Low | No |
Description: The legacy update scripts can only handle some UBI volume layout. Make sure the Toradex Easy Installer uses a layout which can be processed by the legacy update scripts. Workaround: Erase UBI partition before using legacy update scripts (run erase.part ubi). |
TEI-209 | Fixed | Keyboard not working | Apalis iMX6, Colibri iMX6 | USB | Low | No |
Description: Most USB Keyboard do not work as well as hot plugging keyboards at runtime. This is particularly unfortunate when a config block restore is needed, since this operation can only be done using a keyboard. Workaround: Use remote access via RNDIS/Ethernet and VNC to enter the config block information. Alternatively, use a Logitech wireless keyboard/touch mouse combination such as K400r which has been successfully tested. |
TEI-207 | Fixed | Obsolete Naming/Versioning | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Buildsystem | Low | No |
Description: Currently the GUI still reads 'Toradex Easy Install v1.1' but we decided to leave that version aka v away for software artefacts. |
TEI-206 | Fixed | Failed to Get Size of URL | Colibri iMX7 | Toradex Feature | Low | No |
Description: Tezi 1.1pre gives the following error trying to install either Tezi 1.0 or LXDE-Image 2.7b3 via Internet: Failed to get size of URL. |
TEI-308 | New Feature | Show a Restore User Interface If the Config Block Is Missing | Colibri iMX7, Apalis iMX6, Colibri iMX6 | ConfigBlock | Low | No |
Description: In case the Toradex Config Block isn't found on the module, a dialog is now shown which allows to restore the Config Block information by entering the information from the module sticker. |
TEI-260 | New Feature | Support Images in Deeper Levels of Directories | Colibri iMX7, Apalis iMX6, Colibri iMX6 | Toradex Feature | Low | No |
Description: So far only the first level of directories is scanned for images. With this change up to two levels of sub directories will be scanned. Workaround: Make sure image description file (image.json) are nested not deeper than one level. |
TEI-239 | New Feature | Support Colibri iMX7 Solo 256MB and Dual 512MB Modules | Colibri iMX7 | Kernel | Low | No |
Description: Provide Toradex Easy Installer support for Colibri iMX7 Solo 256MB and Dual 512MB modules. |
TEI-238 | New Feature | Use New Naming and Versioning Convention for Toradex Software Packages | Apalis iMX6, Colibri iMX6 | Buildsystem | Low | No |
Description: We changed the naming and versioning format slightly in order to have a common approach for Linux, WinCE, and other Toradex software packages.
Details about the versioning can be found here: https://developer.toradex.com/knowledge-base/toradex-software-versioning-convention |
TEI-234 | New Feature | Toradex Easy Installer Does not Use MAC Address From Toradex Config Block | Apalis iMX6, Colibri iMX6 | Bootloader, ConfigBlock | Low | No |
Description: The U-Boot shipped with Toradex Easy Installer does not read the Config Block which leads to Linux not using the module individual MAC address with Toradex OUI. |
TEI-200 | Fixed | Recovering Toradex Easy Installer Fails With USB Issues | Apalis iMX6, Colibri iMX6 | USB | Low | No |
Description: Recovering Toradex Easy Installer fails with error messages on the serial console such as "EP0/in FAIL" (and similar). Workaround: Some USB hosts might work better, also adding a USB hub between the host and target helps in some situations. |
TEI-331 | Fixed | RNDIS not Recognized by Win 10 Host by Default | Apalis iMX6, Colibri iMX6 | USB | Low | No |
Description: So far a generic Product ID and Vendor ID has been used, which some Windows 10 versions seem not to recognize. With this release, MS OS Descriptors are used for better compatibility across various Windows versions. |
TEI-307 | New Feature | Add Support for Colibri iMX6 Modules | Colibri iMX6 | Kernel | Low | No |
Description: Provide initial support for Toradex Easy Installer on Colibri iMX6 modules. |
TEI-212 | Fixed | U-Boot Does not Detect Recovery Mode When Using bmode usb | Apalis iMX6, Colibri iMX6 | Bootloader | Low | No |
Description: When entering recovery mode via bmode usb command in a v2016.11 U-Boot, downloading Toradex Easy Installer via recovery mode failed. |
TEI-198 | Fixed | recovery-linux.sh does not work with bmode usb | Apalis iMX6 | Bootloader, USB | Low | No |
Description: Using recovery-linux.sh after entering recovery mode via U-Boot bmode usb does not seem to work. |
|
TEI-261 | New Feature | Add Support for Apalis iMX6 Modules | Apalis iMX6 | Kernel | Low | No |
Description: Provide initial support for Toradex Easy Installer on Apalis iMX6 modules. |