Welcome to the product page for the Colibri PXA300 (XT) computer on module.
This page contains a variety of information relating to the Colibri PXA300 (XT) product and is intended to be used as a single point of access for all information you need.
If you are new to the Colibri family of computer on modules, this section is intended to help get you up and running fast.
As well as the Colibri module, you will need to order a suitable carrier board. All carrier boards are compatible with all Colibri modules, but we recommend you order either the Colibri Evaluation Board or the Iris Carrier Board, depending on your individual needs.
The Carrier Board Accessory Kit includes:
Toradex has Carrier Board Accessory Kit available on our webshop.
Toradex distributes directly to customers, exclusively via the internet. To place your order, please use our webshop.
Depending on which carrier board you have purchased you can go through the articles: First Steps with Colibri Evaluation Board, Iris, Viola.
We also have quick video tutorials.
For Windows CE customers, please use the update tool to update to the latest image version.
Please go through this article to setup your computer module.
For Windows CE customers, please check out our getting started section for information on getting development environment setup and start writing your first "hello world" application.
If you are having trouble getting started, then our support team is here to help you. Please refer the article - how to contact support.
Features of the Colibri PXA300 (XT) are given below.
Colibri PXA300 XT only:
Product Datasheet:
Colibri PXA3xx CPLD Description:
Technical references manuals, user guides and related material for the PXA3xx processors as used on the Colibri PXA3xx range of computer on modules can be found here:
Datasheets for other components used on the Colibri PXA3xx range of computer modules can be found here:
Migration and Design Guide:
Check out our carrier board design guide including electronic design data (schematics, layout and libraries) at no cost.
The following table lists Bootloader, OS images, BSPs and Platform Builder Workspaces, which are available for the range of Colibri PXAxxx modules.
| Windows CE 5.0 (CE5) |
Windows Embedded CE 6.0 (CE6) |
|
|---|---|---|
| OS Image |
|
|
| BSP | ||
| Workspace |
The following Linux BSP is available for the Colibri PXAxxx. Please note that the Linux BSP is not being actively developed by Toradex at present and therefore support is limited.
Colibri PXAxxx U-Boot and Linux BSP
For further information and downloads, check out our software resources section here
The following Android BSP is available for the Colibri PXAxxx. Please note that the Android BSP is not being actively developed by Toradex at present and therefore support is limited.
Colibri PXAxxx Android BSP
Product revision history for the Colibri PXA300 (XT) computer modules.
| Product # | Product Description | Changes from Previous Version | Release Date | PCN Document |
| 00041000 |
Colibri PXA300 624MHz V1.0A |
Initial |
No release |
|
|
00041001 |
Colibri PXA300 208MHz V1.0B |
No release |
||
|
00041100 |
Colibri PXA300 208MHz V1.1A |
PXA300 208 MHz A2 stepping |
2007-10-30 |
|
|
00041101 |
Colibri PXA300 208MHz V1.1B |
Changed assembly option to provide pin compatibility with Colibri PXA270/320 for VLIO devices |
2008-02-07 |
|
| 00041300 | Colibri PXA300 208MHz V1.3A | The PMIC (Power Management IC) has been changed from the Maxim MAX8661 to the National LP3972S | 2010-12-21 |
PCN.2015.03.26.1 (replaces PCN.2014.10.06.1) |
| 00041301 | Colibri PXA300 208MHz V1.3B | Using EON Flash instead of Samsung Flash | 2015-04-15 | |
| Product not recommended for new designs. Please check PCN.2014.10.06.1 |
| Product # | Product Description | Changes from Previous Version | Release Date | PCN Document |
| 00071300 |
Colibri PXA300 208MHz XT V1.3A |
Initial |
2013-05-31 |
PCN.2014.10.06.1 |
|
Product not recommended for new designs. Please check PCN.2014.10.06.1 |
