Search by Tags

Colibri Evaluation Board

 

Colibri Evaluation Board

  • Carrier Board for Colibri System on Module Family
  • 200mmx200mm form factor
  • Supports wide range of connectivity and multimedia I/Os
  • Ideal for evaluation and development

Recommendation for a first-time order

Toradex recommends to order the following additional products for your fist-time order:


All the products can be ordered online at Toradex Webshop

Getting started for the first time?

For detailed step-by-step instructions about how to start with both, SoM and Carrier Board, please have a look at our step-by-step Getting-Started Guide:

Product-specific information for the Colibri Evaluation Board:

Having trouble?

Please contact our technical support. Various option of technical support are mentioned in the article below.

I/O Support

  • Up to 32 Bit External Bus
  • USB 2.0 (4x Host, 1x OTG, 1x Device )
  • I2C (4x)
  • SPI (4x)
  • UART (2x RS232, 1x RS422/485)
  • IrDA (1x)
  • PWM (4x)
  • GPIO (up to 158)
  • Analog Input (4x)
  • Ethernet (1x 10/100 Mbit)
  • SDIO/SD/MMC (1x 4 Bit)
  • CAN (1x)
  • LVDS (1x Single Channel)
  • HDMI (1x)
  • VGA (1x)
  • RGB (1x 24/18 Bit)
  • Resistive Touch (4/5-wire)
  • Camera Parallel Interface (1x)
  • Analog Audio Line in (1x)
  • Analog Audio Mic in (1x)
  • Analog Audio Headphone out (1x)
  • USB-to-RS232 Transceiver (1x)
  • RTC on Board (1x)
  • JTAG


* This is a module-specific feature and may not be supported by all the computer-on-modules in the Colibri family. For more details, refer to the datasheet of Colibri computer-on-modules
** The breakout/jumper area provides a flexible mechanism for changing the hardware configuration or signal routing for any external circuit

Click to See the Product Numbering Scheme

A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.

Colibri Evaluation Board

PN: 0101

Product # Product Description Changes from Previous Version Release Date PCN Document
01012102 Colibri Evaluation Board V2.1C Initial Version 2006 PCN Colibri Evaluation Board V2.1C 2012-09-21
01013100 Colibri Evaluation Board V3.1A Rearranged many connectors
Support for USB 2.0 HighSpeed
Support for DVI-I
Support for LVDS
Support for RS422/485
Changed CAN controller, using SPI now
Removed PCMCIA interface (CF-Card)
2012-09-12 Evaluation Product, No PCN
01013200 Colibri Evaluation Board V3.2A

Improved flexibility:
- Added jumper for CAN RX and TX

- Added jumper for Ethernet TX Center Tap
- Connected RTS and CTS of the debug serial port to the USB to Serial port (X27)
- Camera Interface connector X22 pin-out has been updated to be compatible with Apalis Evaluation Board

2014-11-30 PCN Colibri Evaluation Board V3.2A 2016-06-03
01013201 Colibri Evaluation Board V3.2B

Correction of Errata: Correct Audio Connector (X26) assembled

2016-03-11

Errata Document