This section contains initial information needed to set-up the Apalis Evaluation Board for the first time.
Toradex recommends to order the following additional products for your fist-time order:
All the products can be ordered online at Toradex Webshop
For detailed step-by-step instructions about how to start with both, SoM and Carrier Board, please have a look at our step-by-step Getting-Started Guide:
Product-specific information for the Apalis Evaluation Board:
Please contact our technical support. Various option of technical support are mentioned in the article below.
- USB 3.0 (1x Host, 1xOTG)
- PCIe (2 x1 PCIe Slot, 1x Mini PCIe)
- USB 2.0 (4x Host )
- I2C (3x)
- SPI (2x)
- UART (2x RS232, 1x RS422/485)
- IrDA (1x)
- PWM (4x)
- GPIO (up to 135)
- Analog Input (4x)
- Ethernet (1x 10/100/1000 Mbit)
- SATA (1x)
- SDIO/SD/MMC (1x 8 Bit, 1x 4 Bit)
- CAN (2x)
- LVDS (1x Dual Channel)
- Digital Audio
- S/PDIF In / Out (1x)
- HDMI (1x)
- VGA (1x)
- RGB (1x 24 Bit)
- Resistive Touch (4/5-wire)
- Camera Parallel Interface (1x)
- Analog Audio Line in (1x)
- Analog Audio Mic in (1x)
- Analog Audio Headphone out (1x)
- JTAG
- RTC on Board (1x)
- USB-to-RS232 Transceiver (1x)
Note: Please also have a look at the Apalis Evaluation Board Errata Document
A basic 3D model for the Apalis Evaluation board can be downloaded here.
This is a SolidWorks CAD model. You can download the free eDrawings model viewer from SolidWorks here.
It is a generic STEP model that can be opened and modified in any 3D CAD.
It is a generic 3D pdf model that can be opened in Adobe Reader.
Click to See the Product Numbering Scheme
The format of the 8-digits Product Number (PID8) is the following:
-
Product Numbering Scheme
The below table describes the structure of the Product Number (PID8):
| Field |
Description |
| PPPP |
4-digits number, indicating the Product Configuration (PID4) that describes the key properties of the product (e.g. Product Group, RAM capacity, etc.) |
| VV |
2-digits number, indicating the Major and Minor Version (in that order) |
| AA |
2-digits number, indicating the Assembly Variant |
See the complete list of available combinations on the Revision History table of the corresponding product page.
Product number (PID8): 00291100:
0029: Apalis iMX6D 512MB
11: Major Version 1, Minor Version 1, Version V1.1 in short
00: Assembly Variant A
A specific product revision has a lifecycle defined by the product state. Learn more about it on the Product Change Notifications.
PN: 0115
| Product # |
Product Description |
Changes from Previous Version |
Release Date |
PCN Document |
|
01151000
|
Apalis Evaluation Board V1.0A
|
Initial Release
|
2013-03-15
|
Evaluation Product, No PCN |
|
01151100
|
Apalis Evaluation Board V1.1A
|
- Fixed JTAG connector issue
- Added ESD protection to some USB and HDMI signals
- Pull-down POWER_ENABLE_MOCI
- Added pull-up to the FT232 TxD pin
- The detailed revision history to this version can be found inthe Schematics on the first page
|
2014-09-15 |
PCN Apalis Evaluation Board V1.1A 2019-11-06 |
|
01151101
|
Apalis Evaluation Board V1.1B
|
Interim product, only for the Apalis iMX8 Early Access
- R44 changed to a 0Ω-resistor for sufficient power supply for the Apalis iMX8
|
2019-05-07 |
Interim Product, no PCN - see V1.1A for PCN |
|
01151102
|
Apalis Evaluation Board V1.1C
|
- R44 changed to a 5mΩ-resistor for sufficient power supply for the Apalis iMX8
- X18 SD card holder changed from 8-bit to 4-bit due to EOL of the previous part
|
2019-11-06 |
|
