| Manufacture: | e-con Systems |
|---|---|
| Device Type: | Camera |
| Interface: | MIPI CSI-2 |
| Operating Temperature: | -30° to 70° C |
| Features: | Chroma Type: Color Focus: Fixed Focus Housing: Bare Board Integrated ISP Lens Mount: S-mount Pixels: 13MP Resolution: 4192x3120 Sensor Type: CMOS Sensor: AR1335 |
The following table shows which setups were tested with this device, including the setup details and date of test:
| Hardware / Firmware Version | Module (Version) | Board (Version) | OS (OS / BSP Version) | Note | Test Date |
|---|---|---|---|---|---|
No results found. | |||||
e-con Systems provides a user manual with comprehensive instructions to make the camera work. In this article, we summarize some of those steps for a quick reference, but you should not skip reading the e-con Systems documentation:
Tip: in the link above, you will also find the camera datasheet and the schematics for the adapter board for Ixora, ACC-IXORA-WTB-ADP, among other documents.
The camera module e-CAM137A_CUMI1335_MOD from e-con Systems is sold together with an adapter board and cables as the evaluation kit e-CAM131_CUiMX8.
Any Toradex carrier board that supports the MIPI CSI-2 interface connects to the camera kit out-of-the-box, hardware-wise:
Attention: This camera is not yet integrated into the Toradex BSP and support is coming up in the next months. If you need to use this camera, please contact sales.
