Article updated
at 27 Sep 2012
US15W codename Poulsbo is the System Controller Hub (SCH) used for Toradex Robin and Woodpecker x86 modules.
There are several versions available from the US15. Both, Robin and Woodpecker are using the US15W (22x22mm^2) due to its very small form factor.
- Thermal Design Power: 2.3 watts
- Temperature Range: Commercial: 0° to +70°C
- Package: 1249-ball FCBGA lead free, 22x22 mm^2
Documentation available under: http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-z5xx/hardware?wapkw=ALL(us15w+eds)
- Thermal Design Power: 2.3 watts
- Temperature Range: Commercial: 0° to +70°C
- Package: 1295-ball FCBGA lead free, 37.5x37.5 mm^2
- Thermal Design Power: 2.3 watts
- Temperature Range: Industrial: -40° to +85°C
- Package: 1295-ball FCBGA lead free, 37.5x37.5 mm^2
- Open the "US15W - USBC XPpro Driver" site on http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=3036&DwnldID=16645
- Download and open the file "US15W_USB_Client_Drivers_XPPro.zip"
- Note: This file include a driver to use the USB Client Port under Windows XP, but does also include the Chipset Driver.
- Important: It is not necessary nor useful to install the USB Client Driver if you do not need a USB Client Port. If you need the USB Client Port you have to enable this function in the BIOS setup first.
- Open file "384763_Chipset.INF.zip", open file "infinst_autol.zip" and unpack the files to an empty directory on the desktop. Switch to this directory and run "Setup.exe"
The IDE interface supports the following transfer modes:
