Telnet

Overview

The default Win CE Image contains the Win CE Telnet server.

You can use the Webinterface to do the basic setup.

How to test Telnet

Before testing, we need to set the Remote Admin password. More details about this can be found in the Remote Admin section of the following article. Note: User will be admin

1. Install and open TeraTerm on development PC:
2. Under TCP/IP : Enter Host IP address and choose Telnet Service.
3. Enter user and password, after successful login, you can access Command Prompt of Colibri Device.

You can also use any other telnet terminal program.

Any feedback/questions? Please send us email at support@toradex.com.