Overview

The GpioConfig tool provides an interactive interface to the versatile GPIOs of the Colibri modules. Features include:

• View current status of any GPIO.
• Sort by Description / GPIO number / SODIMM number / Evaluation Board jumper number.
• Change I/O direction.
• Change output level.
• Select alternate function of any pin.
• Modify the GPIO boot settings.

PXA, Tegra GPIOConfig Tool

The version 2.4 of GpioConfig works for Toradex modules based on PXAxxx and Tegra Txx CPUs.

You can find a download link here:

• 

Vybrid GPIO Tool

The Gpio tool provides an interactive interface to the versatile GPIOs of the Colibri Vybrid modules. Features include:

• View current status of any GPIO.
• Sort by Description / GPIO number / SODIMM number / Evaluation Board jumper number / Pin position.
• Change I/O direction.
• Change output level.
• Select alternate function of any pin.

Note: For easy maintenance, we have split GPIOConfig tool into a separate GPIO tool for the Vybrid modules.

The Vybrid GPIO Tool works on Colibri Vybrid modules with the bootloader / WinCE image V1.1 and later.

• 

Fix: Pull-up by 22k and 47k was not working on Vybrid GPIO V1.0. Fixed in V1.1.

iMX6 GPIO Tool

The Gpio tool provides an interactive interface to the versatile GPIOs of the iMX6 modules. Features include:

• View current status of any GPIO.
• Sort by Description / GPIO number / SODIMM number / Evaluation Board jumper number / Pin position.
• Change I/O direction.
• Change output level.
• Select alternate function of any pin.

Notes:

• We have split the former GPIOConfig tool into a separate GPIO tools for each platform.
• The iMX6 GPIO Tool works on Colibri and Apalis iMX6 modules only with the bootloader / WinCE image V1.0Beta4 and later.
• UART signal naming: UARTs are used in DTE mode on Colibri and Apalis iMX6 modules. This means the UARTx_RX_DATA port is transmitting data from the SoC while the UARTx_TX_DATA port is receiving it. Please also refer to the Apalis iMX6 or Colibri iMX6 datasheet for further details on individual pins.

• 

iMX7 GPIO Tool

The GPIO tool provides an interactive interface to the versatile GPIOs of the iMX7 modules. Features include:

• View current status of any GPIO.
• Sort by Description / GPIO number / SODIMM number / Evaluation Board jumper number / Pin position.
• Change I/O direction.
• Change output level.
• Select alternate function of any pin.

Note: For easy maintenance, we have split GPIOConfig tool into a separate GPIO tool for the iMX7 modules.

The iMX7 GPIO Tool works on Colibri iMX7D and Colibri iMX7S.

•