First Steps with Colibri Evaluation Board

Congratulation you got a Colibri Evaluation Board. Here your first steps to get it running.

• Insert the Colibri Module to the 200 pin SODIMM connector.
• Connect a mouse & keyboard to the USB host port(X32/X31).
• Connect a monitor to the VGA port(X24) or EDT Unified Interface Display or if you do not have any display, use Remote Display Tool to see WinCE desktop on your development PC.
• Connect 12V DC @ 3A power supply (recommended).
• Press On/Off button on Colibri Evaluation Board.

Now, you should see the the WinCE desktop in VGA resolution in few seconds.

Note: If you use a Colibri T20 make sure you enable USB High Speed in the registry.

Connect Debug Serial Port

• You will need one USB B type to USB A type cable.
• Connect USB B type to X27 and USB A type to development PC. Make sure JP17 and JP19 is set to USB.
• Start a Terminal Program on your PC
• Enable the Debug Messages

For video tutorial click here..